Home

DOI 10.21440/2307-2091-2017-2-57-59

Improving the extraction-and-loading process in the open mining operations pdf

Cheban A. Yu.

Using the explosions is the main way to prepare solid rocks for the excavation, and that results in the formation of a rock mass of uneven granulometric composition, which makes it impossible to use a conveyor quarry transport without the preliminary large crushing of the rock mass obtained during the explosion. A way to achieve the greatest technical and economic effect is the full conveyorization of quarry transport, what, in this case, ensures the sequenced-flow of transport operations, automation of management and high labor productivity. The extraction-and-loading machines are the determining factor in the performance of mining and transport machines in the technological flow of the quarry. When extracting a blasted rock mass with single-bucket excavators or loaders working in combination with bottom-hole conveyors, one uses self-propelled crushing and reloading units of various designs to grind large individual parts to fractions of conditioning size. The presence of a crushing and reloading unit in the pit-face along with the excavator requires an additional space for its placement, complicates the maneuvering of the equipment in the pit-face, and increases the number of personnel and the cost of maintaining the extraction-and-reloading operations. The article proposes an improved method for carrying out the extraction-and-loading process, as well as the design of extraction-and-grinding unit based on a quarry hydraulic excavator. The design of the proposed unit makes it possible to convert the cyclic process of scooping the rock mass into the continuous process of its loading on the bottom-hole conveyor. Using the extraction-and-grinding unit allows one to combine the processes of excavation, preliminary crushing and loading of the rock mass, which ensures an increase in the efficiency of mining operations.

Keywords: excavation; rock mass; conditioning size; bucket; receiving hopper; crusher; automatic control system.

 

REFERENCES

1. Anistratov Ju. I., Anistratov K. Ju., Shhadov M. I. 2010, Spravochnik po otkrytym gornym rabotam [Handbook for open-cast mining], Moscow, 700 p.
2. Cheban A. Ju. 2015, Sovershenstvovanie tehnologiy otkrytoy razrabotki mestorozhdeniy s ispol'zovaniem kar'ernyh kombaynov i otvaloobrazovatelej [Improvement of technologies for open development of deposits using quarry combines and spreaders]. Zapiski Gornogo instituta [Journal of Mining Institute], vol. 214, pp. 23–27.
3. Shhadov V. M. 2004, Otkrytaja razrabotka slozhnostrukturnyh ugol'nyh mestorozhdeniy Vostochnoj Sibiri i Dal'nego Vostoka [Open development of complex-structural coal deposits in Eastern Siberia and the Far East], Mosow, 298 p.
4. 2014, Special equipment for quarry operations. Zement-Kalk-Gips Int, vol. 67, no. 10, pp. 12–13.
5. Cheban A. Ju. 2017, Tehnicheskoe osnashhenie predpriyatiy po dobyche nerudnyh stroitel'nyh materialov v Habarovskom krae [Technical equipment of enterprises for the extraction of non-metallic building materials in the Khabarovsk Territory]. Mehanizacija stroitel'stva [Mechanization of construction], no. 2, pp. 23–26.
6. Rzhevskij V. V. 1985, Otkrytye gornye raboty. Ch. I. Proizvodstvennye processy [Open mining operations. Part I. Production processes], Moscow, 509 p.
7. Sandrigailo I. N., Aref'ev S. A., Moysiev H. S., Glebov I. A., Shlohin D. A. 2015, Analiz effektivnosti primeneniya sharnirno-sochlenennyh avtosamosvalov pri razrabotke mestorozhdeniy s malymi zapasami [Analysis of the effectiveness of the application of articulated-dump trucks in the development of deposits with small reserves]. Izv. UGGU [News of the Ural State Mining University], no. 2, pp. 23–27.
8. Balanchuk V. R. 2011, Ispol'zovanie vnutribortovogo peregruzochnogo punkta dlya dorabotki glubokih kar'erov AK «ALROSA» [Use of the inboard loading point for finishing the deep quarries of AK "ALROSA"]. Gornoe oborudovanie i elektromekhanika [Mining equipment and electromechanics], no. 9, pp. 11–13.
9. Trubeckoy K. N., Zharikov I. F., Shenderov A. I. 2014, Sovershenstvovanie ciklichno-potochnoy tehnologii pri kompleksnom osvoenii mestorozhdeniy [Perfection of cyclic-flow technology in integrated development of deposits]. Markshejderiya i nedropol'zovanie [Mine survey and subsoil use], no. 3, pp. 22–31.
10. Jakovlev V. L., Bahturin Ju. A., Zhuravlev A. G. 2015, Osnovnye aspekty formirovaniya i novye nauchnye napravleniya issledovaniy transportnyh sistem kar'erov [Basic aspects of formation and new scientific directions of research of transport systems of quarries]. Nauka i obrazovanie [Nauka i Obrazovanie], no. 4, pp. 67–72.
11. 2014, Wirtgen surface mining for selective limestone mining in the North Caucasus Russia. Zement-Kalk-Gips Int, vol. 67, no. 10, pp. 18–19.
12. Cheban A. Yu., Sekisov G. V., Khrunina N. P., Shemyakin S. A. 2014, Upgrading continuous and cyclic excavation and transportation during open-pit mining. Eurasian mining, no. 1, pp. 22–24.

Лицензия Creative Commons
All articles posted on the site are available under the Creative Commons Attribution 4.0 Global License.